Winplus and the Yada hands-free mobile device product line at CES 2008
We dropped by the Winplus booth where they had their “Yada” collection of hands-free mobile products on display. Their booth included a mini-cooper which showed off how their hands-free products could be used while on the road. Here’s a shot of the prettied-up mini-cooper as well as the innards of the car.
Speaking of pretty things, Yada had a sweet display wall up showing off customized versions of their YD-V1 + Phone Holder + Car Charger product. The YD-V1 is a universal phone holder which comes with a Bluetooth headset too. Features of the YD-V1 + phone holder + car charger include:
- Auto “end” calls when the headset is placed in the charging cradle
- Auto “power off” when no Bluetooth signal is detected and/or not being used for more than an hour
- Auto “power on” and connects to your mobile phone when engine starts
- Auto answer incoming call when headset is removed from charging cradle
- VoIP compatible
- Pair with up to 8 devices
The above shot shows off some of the Yada driving kits that utilize the Yada YD-V1- including (from left to right), a mobile phone suction cup mount, a cup holder mount, and the YD-V1 by itself.
Above – the left headset is the Yada YD-V11 while the right is the YD-V7.
The YD-V11 features:
- Bluetooth 2.0 support
- Supports HSP, HFP profiles
- Noise reduction
- 10 meter range
- 7 hour talk time
- 140 hour standby time
- Ni-MH battery
- Measures 67 x 24 x 16 mm and weighs 21.4 grams
The YD-V7 features:
- Bluetooth 2.0 support
- Supports HSP, HFP profiles
- 10 meter range
- rechargeable Li-Polymer battery
- Measures 1.77 x 0.75 x 0.49 inches and weighs 10.8 grams
The picture above shows off the YD-V3 on the left and the YD-V1 on the right.
The YD-V3 features:
- Bluetooth 1.2 support
- Supports HSP, HFP profiles
- 10 meter range
- Pairs up to 7 devices
- 4-5 hour talk time
- 70 hour standby time
- 1-2 hour charge time
- Measures 1.13 x 0.79 x 0.50 mm and weighs 8.3 grams
The YD-V1 features:
- Bluetooth 2.0 support
- Auto “End” calls when headset is placed in charging cradle and auto answer when headset is removed
- Auto “Power Off” when no Bluetooth signal or not used for more than an hour
- Auto “Power n” when engine starts
- Pairs up to 8 devices
- Supports HSP and HF profiles
- 79 RF channels with 33 feet range
- Li-Ion battery
- 6 hour talk time
- 105 hour standby time
- 10 level volume controls
- Uses CSR Chip Bluecore 4/Class II
Next up, we have the YD-V2 on the left and the YD-V8 on the right. Both are speaker-phone products designed for the car.
The YD-V2 features:
- Handsfree communication
- Clips to any sun visor
- Supports 2 mobile devices at the same time
- Bluetooth 2.0 support
- Supports HSP, HF profiles
- 33 feet range
- 3 AAA batteries
- 4 hour talk time
- 70 hour standby time
- 10 level volume control
The YD-V8 features:
- VoIP compatible
- Clips to sun visor
- 3 Button user interface
- Bluetooth version 1.2 support
- Supports HSP 1.1, HFP 1.5, AVRCP, A2DP profiles
- 10 meter range
- pairs up to 8 devices
- Polymer battery
- 1.5 watt speaker power
- 3.5 mm audio out jack
- Dual microphones
- 4.5 – 6 hour talk time
- 140 – 280 hour standby time
- 2.5 hour charge time
- Measures 3.25 x 1.57 x 0.71 inches and weighs only 42 grams
Finally, we have the YD-V12 and the YD-V9 speakerphones.
The YD-V12 features:
- Bluetooth 1.2 support
- Slim design
- VoIP compatible
- Privacy mode
- 3 button user interface
- Clips to sun visor
- Supports HSP and HFP profiles
- 10 meter range
- Pairs up to 8 devices
- 2 watt speaker power
- mini USB port
- Dual microphones
- 9-10 hour talk time
- 200-250 hour standby time
- 3 hour charge time
- Measures 4.99 x 1.88 x 0.69 inches and weighs 79 grams
The YD-V9 features:
- Bluetooth 2.0
- Direct Charger
- 3 Button user interface
- Echo cancellation and noise reduction
- Hands-free device
- Supports HS and HF profiles
- Full duplex
- Red/Green LED
- 10 meter range
- Point to point connection
- Measures 202 x 69 x 30 mm and weighs 99 grams
Related Posts:
